Collapsing loom Home › Forums › Technical problem solving › Collapsing loom Tagged: folding loom This topic contains 2 replies, has 3 voices, and was last updated by peggyosterkamp 3 years, 4 months ago. Log In Register Lost Password Author Posts March 24, 2016 at 6:30 am #408 PhillenoreParticipant I have the 10-shaft folding loom. It’s old and I renovated it. I can’t tighten the handle enough to keep the beam structure from collapsing if I accidentally press too hard on one of the beams. What solutions do people have to this? March 24, 2016 at 1:50 pm #412 johnosParticipant If the threads aren’t stripped out you might be able to use a fender washer between the loom and the handle to give it more surface area to bear on. Hard to really say without seeing it. March 30, 2016 at 4:08 pm #509 peggyosterkampKeymaster Check the FAQ page for a picture of what I do–add a clamp onto the handle for more leverage. Author Posts Log In Register Lost Password You must be logged in to reply to this topic.